![]() Once this is removed you will see four polished screws along the hinge edge of the bottom pan, and then 4 additional smaller screws under the lip of where the bottom pan sits. On the early Unibody models, you will see that there is a battery latch which can be lifted to remove the battery cover. ![]() If you are unsure of which type of screwdriver you would need, you can simply use the other recommended tool, a Phillips #00, which will allow you to remove the bottom pan from your machine, and then check on the appropriate tool. If you have a later model Unibody (mid-2009 and later), you will likely need the specialized 5-point torx screwdriver, which we offer here: ![]() On most of the early Unibody models, the battery is held in place with a tri-wing screwdriver, which you can locate here: The first thing you will need to do is to determine what tools you will need.
0 Comments
Leave a Reply. |